Eck Provides a Barrier between Dissimilar Metals to Prevent Galvanic Corrosion
(the corrosion caused by the direct contact of dissimilar metals)
Eck was formulated to prevent the corrosion of all kinds of metals. It performs three vital jobs in the protection of dissimilar metals: it creates a barrier between metals, seals out moisture, and absorbs natural corrosive energy caused by dissimilar metals.
Eck is petroleum-based, dielectric (for use with lighting/wiring), and Zinc-rich, preventing Galvanic or dissimilar metal corrosion, magnesium chloride corrosion, calcium chloride corrosion, rust, and hardware/fastener seizing.
The product comes in handy squeeze tubes, aerosol, and quart cans. Thousands of laboratory testing hours and numerous world-class manufacturers prove that Eck is the superior coating for preventing the corrosion of dissimilar metals.
Eck is available in 3 convenient package options:
12 oz. Spray Can
Aerosol cans come with a plastic straw for pinpoint application. Coverage is approximately 18 square feet.
32 oz. Quart Can
Liquid paste can be brushed or rolled on. Great for dipping hardware. Coverage is approximately 110 square feet.
3.75 oz. Tube
Convenient liquid paste squeeze tube, ideal for small applications such as holes and on hardware. Comes with a screw-on nozzle attachment.
.5 oz. Tube
Half-ounce tube of liquid paste for small applications such as holes and on hardware.
Contains: Solvent Naphtha 64742-95-6, Zinc Powder 7440-66-6,
Aluminum Stearate 637-12-7, Additive, Dimethyl Disulfoxyde 67-68-5.
OTHER INGREDIENTS: “Contents Partially Unknown”.
WARNING Flammable liquid and vapor. May cause respiratory irritation.
May cause damage to organs through prolonged or repeated exposure.
Prevention: Use only with adequate ventilation. Do not breathe
dust/vapors/spray mist. Avoid contact with eyes/skin/ clothing. Wear
protective gloves/clothing/glasses. Keep away from heat/sparks/open
flames/hot surfaces. Do not eat/ drink/smoke when using this product.
Ground/bond container and receiving equipment. Take precautionary
measures against static discharge. Use only non-sparking tools.
Response: In case of fire, use extinguishing powder or water spray.
Immediately contact a doctor or POISON CONTROL CENTER if you feel
unwell. If medical attention is needed, have product label at hand. IF IN
EYES: Rinse with water for several minutes. Remove contact lenses if
present. If eye irritation persists seek medical attention. IF SWALLOWED:
Rinse mouth with water. Do not induce vomiting. IF INHALED: Remove to
fresh air. IF ON SKIN: Wash thoroughly with water. Remove all
contaminated clothing. Storage: Keep container tightly closed. Store in a
well ventilated place. Keep cool. Protect from sunlight and do not expose
to temperatures exceeding 50˚C/122˚F. Disposal: Dispose of product in
accordance with local/regional/national/international regulations.
Additional Precaution Statements: Vapors may ignite explosively and
cause a flash fire. Prevent buildup of vapors by opening windows and
doors to achieve cross ventilation. Reports have associated repeated and
prolonged occupational overexposure to solvents with permanent brain
and nervous system damage. Intentional misuse by deliberately inhaling
the contents may be harmful or fatal. In cases where short and/or long-term overexposure conditions exist, a charcoal filter respirator should be
worn. Follow respirator manufacturer's directions for use.
Read Safety Data Sheet Before Use
Fill out our form and an Austin Hardware® solutions consultant will contact you!
"Since my company entered into a vendor managed inventory program with Austin, our service levels and in-stock position on our parts have never been better. We consolidated 23 suppliers down to one, Austin.
Now we only have one invoice to review, one shipment to check in and we are in stock 99% of the time! Austin has one of the best customer service teams we work with, I would recommend this program to anyone who needs to take control of their inventory and be sure to have the parts you need on the shelves!"
Gary from Ohio
"I wanted to send along some great news. We have experienced a few problems with shipping over the years, but the solutions that you put in place over the last few weeks have been very positive. On another note, Tom and Emma, the Vendor Managed Inventory team that I have been working with, have done a great job responding to concerns and questions in a timely fashion. That fact is another reason our VMI program is successful and getting stronger every day. Our overall numbers continue to increase and we are looking forward to the growth in 2017."
Shawn from Texas